Filter
Lines:
Levels:
Top:
Last jump:
XXX
XXX
Mark:
HyperScope:
CE CE 2024-02-03 - 16:00 UTC
ce,commands, created by CE 2024-02-03 - 08:00 PST
CE CE 2024-02-03 - 16:00 UTC
For MiniAug Introduction and User basics see
CE CE 2024-02-03 - 16:00 UTC
COMMANDS
CE CE 2024-02-03 - 16:00 UTC
Commands are "natural-language style" like talking to Siri or Alexa, but instead of "Get directions" or "Call so-and-so!" you tell it to Jump somewhere or Delete something with just a few simple keystrokes and mouseclicks
CE CE 2024-02-03 - 16:00 UTC
MiniAug commands typically pair an action Verb like "Delete", with a Noun naming the object you are acting on like "Word", while the system adds short prompts to guide you along. For most command words, you need only enter the first letter. So for example, to delete a word, you type "dw" and MiniAug fills out "Delete Word" and prompts you to select the word to be deleted, you click anywhere in the word to select it, and OK to go.
CE CE 2024-02-03 - 16:00 UTC
All you had to do was "dw" click OK, while it fills out as you go for visual feedback.
CE CE 2024-02-03 - 16:00 UTC
When several command word choices start with the same letter, like Copy and Create, for the more commonly used Copy you type a "c" and for Create you type "cr".
CE CE 2024-02-03 - 16:00 UTC
Prompts -- tell you what to do next:
CE CE 2024-02-03 - 16:00 UTC
"OK:" is prompting you to give the OK with a single mouse click "T:" means you can now Typein your input , ending with OK "M:" to select or "Mark" something by pointing with a single click "V:" to specify a View (see <8> below) "A:" to enter an Address like a purple number or name (see <7> below) A slash "/" in the prompt is for multiple choice, for example "M/T:" shows you can either Mark or Type your input. .
CE CE 2024-02-03 - 16:00 UTC
FILE COMMANDS
CE CE 2024-02-03 - 16:00 UTC
Create File (named) T/M:
CE CE 2024-02-03 - 16:00 UTC
Update (file) OK:
CE CE 2024-02-03 - 16:00 UTC
Refresh File (restore to last saved) OK:
CE CE 2024-02-03 - 16:00 UTC
Show Directory OK:
CE CE 2024-02-03 - 16:00 UTC
Logout OK: .
CE CE 2024-02-03 - 16:00 UTC
VIEWING
CE CE 2024-02-03 - 16:00 UTC
Basic Jumps
CE CE 2024-02-03 - 16:00 UTC
Jump (to) M:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Item M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Link M/T:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Origin M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Next M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Back M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Return File OK:
CE CE 2024-02-03 - 16:00 UTC
Navigating Structure
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Up / Down (from statement at) M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Predecessor / Successor (of statement at) M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) Head / Tail (of plex at) M/A:
CE CE 2024-02-03 - 16:00 UTC
Jump (to) End (of branch at) M/A:
CE CE 2024-02-03 - 16:00 UTC
Changing the View
CE CE 2024-02-03 - 16:00 UTC
In a Jump with V: -- for V: options see below <079>
CE CE 2024-02-03 - 16:00 UTC
Set Viewspecs V:
CE CE 2024-02-03 - 16:00 UTC
Reset Viewspecs OK:
CE CE 2024-02-03 - 16:00 UTC
Windowing
CE CE 2024-02-03 - 16:00 UTC
Open Window OK: .
CE CE 2024-02-03 - 16:00 UTC
EDITING
CE CE 2024-02-03 - 16:00 UTC
Choose one Verb and one Noun - the command will prompt you along
CE CE 2024-02-03 - 16:00 UTC
VERBS NOUNS ====== ========
CE CE 2024-02-03 - 16:00 UTC
Copy Character
CE CE 2024-02-03 - 16:00 UTC
Delete Word
CE CE 2024-02-03 - 16:00 UTC
Force (case) Text
CE CE 2024-02-03 - 16:00 UTC
Insert Phrase
CE CE 2024-02-03 - 16:00 UTC
Move Visible
CE CE 2024-02-03 - 16:00 UTC
Replace Invisible
CE CE 2024-02-03 - 16:00 UTC
Transpose Link
CE CE 2024-02-03 - 16:00 UTC
Number
CE CE 2024-02-03 - 16:00 UTC
Statement
CE CE 2024-02-03 - 16:00 UTC
Branch
CE CE 2024-02-03 - 16:00 UTC
Group
CE CE 2024-02-03 - 16:00 UTC
Plex .
CE CE 2024-02-03 - 16:00 UTC
Undo Command -- TBD -- for now use Refresh File to start fresh from last update.
CE CE 2024-02-03 - 16:00 UTC
ADDRESSING
CE CE 2024-02-03 - 16:00 UTC
Basic Addressing: The "A:" prompt is for "Address" -- you can address a file or any item in a file, using the following optional elements, in this order:
CE CE 2024-02-03 - 16:00 UTC
1. Optional filename followed by a comma
CE CE 2024-02-03 - 16:00 UTC
2. Optional Name or Number (choose one)
CE CE 2024-02-03 - 16:00 UTC
"Purple Number"
CE CE 2024-02-03 - 16:00 UTC
- Location Numbers like 2c1 are hierarchical, change dynamically
CE CE 2024-02-03 - 16:00 UTC
- Statement Identifiers or "SIDs" never change
CE CE 2024-02-03 - 16:00 UTC
Name
CE CE 2024-02-03 - 16:00 UTC
- Anchor names assigned by the author using html id= or name=
CE CE 2024-02-03 - 16:00 UTC
- Names assigned by the system according to which "name delimiters" are in effect - for example if name delimiters are "(" and ")" then any statement beginning with a word in parens is addressible by that word. Use the Set Name (delimiters) command to control these settings, and Show Name (delimiters) to see what they are set to.
CE CE 2024-02-03 - 16:00 UTC
NOTE: to view the file with these showing, see Viewspecs below <079>
CE CE 2024-02-03 - 16:00 UTC
3. Optional "Relative Addressing"
CE CE 2024-02-03 - 16:00 UTC
You can define a path for the system to follow without knowing the exact address, starting with a period "." followed by lowercase equivalents of any of the above Jump commands <02> -- Origin, Link, Up, Down, Next, Backward, etc. For example, jump to the section named Todo and in the Next statement follow the first link you find there - Jump Link todo.nl
CE CE 2024-02-03 - 16:00 UTC
Exmaples
CE CE 2024-02-03 - 16:00 UTC
Jump Link 7
CE CE 2024-02-03 - 16:00 UTC
Jump Link CE,Commands-Summary,
CE CE 2024-02-03 - 16:00 UTC
Jump Link CE,Commands-Summary,7
CE CE 2024-02-03 - 16:00 UTC
Jump Link 02 .dt .
CE CE 2024-02-03 - 16:00 UTC
LINKS
CE CE 2024-02-03 - 16:00 UTC
Any Address you can type in a Jump Link command, you can place in a link to click on for future Jump Link commands - for example:
CE CE 2024-02-03 - 16:00 UTC
<8>
CE CE 2024-02-03 - 16:00 UTC
CE CE 2024-02-03 - 16:00 UTC
CE CE 2024-02-03 - 16:00 UTC
You can also add Viewspecs in a link, after any address elements, starting with a colon ":"
CE CE 2024-02-03 - 16:00 UTC
CE CE 2024-02-03 - 16:00 UTC
<7 :ym>
CE CE 2024-02-03 - 16:00 UTC
VIEWSPECS
CE CE 2024-02-03 - 16:00 UTC
Basic Viewspecs entered at V:
CE CE 2024-02-03 - 16:00 UTC
y / z blank lines - Show / Hide
CE CE 2024-02-03 - 16:00 UTC
m / n numbers - Show / Hide
CE CE 2024-02-03 - 16:00 UTC
T / U table of contents - Show / Hide
CE CE 2024-02-03 - 16:00 UTC
x / w show outline - 1st level only / All levels
CE CE 2024-02-03 - 16:00 UTC
a / b show -1 / +1 level
CE CE 2024-02-03 - 16:00 UTC
q / r show -1 / +1 line
CE CE 2024-02-03 - 16:00 UTC
Viewspecs can also be placed in a link -- after any address stuff, preceded by a colon ":" -- examples:
CE CE 2024-02-03 - 16:00 UTC
<7 :zn> or <8 :ym> or
CE CE 2024-02-03 - 16:00 UTC
For a full list of viewspecs see .
CE CE 2024-02-03 - 16:00 UTC
. . . . . .
CE CE 2024-02-03 - 16:00 UTC
. . . . . .
CE CE 2024-02-03 - 16:00 UTC
. . . . . .
CE CE 2024-02-03 - 16:00 UTC
. .
CE CE 2024-02-03 - 16:00 UTC
. .